- Home
- ยป
- Our Products
- »
- Three Phase Servo Controlled Voltage Stabilizer
Three Phase Servo Controlled Voltage Stabilizer
Servo Controlled Voltage Stabilizer
Product Brochure
Phase | Three Phase |
Usage/Application | Industrial |
Cooling Type | Oil cooled |
Input Voltage | 360 to 480V |
Output Voltage | 400 to 415V |
Frequency | 45 to 55 Hz |
Efficiency | 98% at full load |
Brand | Constant Power |
Country of Origin | Made in India |
Capacity | 125 kVA |
A Servo Controlled Voltage Stabilizer is a Servo motor controlled stabilization system that performs optimum voltage supply using a Buck/Boost transformer booster that captures voltage fluctuations from input and regulates current to the correct output. An AC synchronous motor adjusts voltage in clockwise or anticlockwise direction and manages the output voltage with components like control card,dimmer,comparator, transistors, mocs, etc.
Technical Details:
- High voltage correction accuracy with output of ±1 voltage correction.
- Switch less system to adjust fluctuating voltage at desired levels.
- High load capacity that supports up to 5000 kVA or above.
- Voltage is based on step less correction.
- Perfect stabilization for hospitals best for intricate machineries like X-ray machines, CAT scans, radiation and diagnostic equipments.
- Wide functioning area from schools, offices, homes and industries.
- Oil cooled and air cooled transformers that fit your budget.
Digital Servo Voltage Stabilizer
Product Brochure
Capacity | 75 kVA |
Phase | Three Phase |
Usage/Application | Industrial |
Cooling Type | Oil cooled |
Input Voltage | 360 to 480V |
Efficiency | 98% at full load |
Brand | Constant Power |
Output Voltage | 400 to 415V |
Country of Origin | Made in India |
Frequency | 45 to 55 Hz |
Digital Servo Voltage Stabilizer uses an advance electronic controlled servo motor concept to govern a motorized variable transformer. Because of the motors involved, there is a small delay in voltage correction. However, output voltage accuracy is usually ±1% with input voltage changes of up to ±50%.This type of technology tends to be extremely effective when considering large three phase applications, as it is able to maintain its accuracy of all these phases, despite of input voltages balance and load balance at any power factor.
Application of Digital Servo Voltage Stabilizer:
- Printing Machines.
- CNC Machines.
- Medical Equipment.
- Textile Machines.
- Packaging Machines.
- Plants / Factories.
500 kVA Servo Voltage Stabilizer
Product Brochure
Phase | Three Phase |
Usage/Application | Industrial |
Cooling Type | Oil cooled |
Input Voltage | 360 to 480V |
Output Voltage | 400 to 415V |
Frequency | 45 to 55 Hz |
Efficiency | 98% at full load |
Brand | Constant Power |
Country of Origin | Made in India |
Capacity | 500 kVA |
We are the leading manufacturer of 500 kVA Servo Voltage Stabilizer. Normally these Servo Stabilizer can be used for various types of applications like cold storage plants, manufacturing plants / industries and with various types of machines like Treadmill, Photo Copier, Scanner Machines at Airport, Medical Equipments, CNC machines, Injection Moulding Machines. Printing Machines, packaging machines, chillers , boilers , Scientific Equipments. These servo voltage stabilizer can be used for industries like cements plants, flour mills , rice shellers, hotels / restaurants, food processing units, pharmaceutical units , paper mills, oil refineries, rubber industries, textile mills, warehouses, rolling mills, sponge iron units, showrooms, schools and colleges etc.
Specifications:
- Automatic digital micro processor based servo controlled voltage stabilizer.
- Contactor at output for tripping at various fault conditions.
- Highly intelligent micro processor based 3 phase P.F. Controller with Dual P.F. Setting and Master Slave modes
- Stabilizer is suitable for unbalanced input voltage and load.
- Controller unit has 4 line LCD display showing input/output voltages and load current along with fault/trip message.
- Wave from distortion - Nil
- Effect of Load Power Factor - Nil
- Indoor/outdoor type (optional)
- Voltage regulation programmable upto 0.5%
- Termination: Heavy duty busbar with high tensile bolt
- Manual Mode: Voltage increase/decrease by spring loaded toggle switch in manual mode
Protection:
- Input over voltage and under voltage cut-off
- Output over voltage and under voltage cut off
- Over current and short circuit cut off
- Single phase prevention
300 kVA Servo Voltage Stabilizer
Product Brochure
Rated Capacity | 300 KVA |
Phase | Three Phase |
Usage/Application | Industrial and Commercial |
Cooling Type | Oil cooled |
Input Voltage | 360 to 480V |
Output Voltage | 400 to 415V |
Control Type | Digital controller |
Frequency | 45 to 55 Hz |
Efficiency | 98% at full load |
Brand | Constant Power |
Country of Origin | Made in India |
We are the leading manufacturer of 300 kVA Servo Voltage Stabilizer. Normally these Servo Stabilizer can be used for various types of applications like cold storage plants, manufacturing plants / industries and with various types of machines like Treadmill, Photo Copier, Scanner Machines at Airport, Medical Equipments, CNC machines, Injection Moulding Machines. Printing Machines, packaging machines, chillers , boilers , Scientific Equipments. These servo voltage stabilizer can be used for industries like cements plants, flour mills , rice shellers, hotels / restaurants, food processing units, pharmaceutical units , paper mills, oil refineries, rubber industries, textile mills, warehouses, rolling mills, sponge iron units, showrooms, schools and colleges etc.
Specifications:
- Automatic digital micro processor based servo controlled voltage stabilizer.
- Contactor at output for tripping at various fault conditions.
- Highly intelligent micro processor based 3 phase P.F. Controller with Dual P.F. Setting and Master Slave modes
- Stabilizer is suitable for unbalanced input voltage and load.
- Controller unit has 4 line LCD display showing input/output voltages and load current along with fault/trip message.
- Wave from distortion - Nil
- Effect of Load Power Factor - Nil
- Indoor/outdoor type (optional)
- Voltage regulation programmable upto 0.5%
- Termination: Heavy duty busbar with high tensile bolt
- Manual Mode: Voltage increase/decrease by spring loaded toggle switch in manual mode
Protection:
- Input over voltage and under voltage cut-off
- Output over voltage and under voltage cut off
- Over current and short circuit cut off
- Single phase prevention
Industrial Voltage Stabilizer
Product Brochure
Capacity | 150 kVA |
Phase | Three Phase |
Usage/Application | Industrial |
Cooling Type | Oil cooled |
Input Voltage | 360 to 480V |
Output Voltage | 400 to 415V |
Control Type | Digital controller |
Frequency | 45 to 55 Hz |
Efficiency | 98% at full load |
Response Time | 10 m sec |
Brand | Constant Power |
Country of Origin | Made in India |
We are the leading manufacturer of Industrial Servo Voltage Stabilizer. Normally these Servo Stabilizer can be used for various types of applications like cold storage plants, manufacturing plants / industries and with various types of machines like Treadmill, Photo Copier, Scanner Machines at Airport, Medical Equipments, CNC machines, Injection Moulding Machines. Printing Machines, packaging machines, chillers , boilers , Scientific Equipments. These servo voltage stabilizer can be used for industries like cements plants, flour mills , rice shellers, hotels / restaurants, food processing units, pharmaceutical units , paper mills, oil refineries, rubber industries, textile mills, warehouses, rolling mills, sponge iron units, showrooms, schools and colleges etc.
Servo Voltage Stabilizer
Product Brochure
Capacity | 750 kVA |
Phase | Three Phase |
Usage/Application | Industrial |
Cooling Type | Oil cooled |
Input Voltage | 360 to 480V |
Output Voltage | 400 to 415V |
Control Type | Digital controller |
Frequency | 45 to 55 Hz |
Efficiency | 98% at full load |
Response Time | 10 m sec |
Correction Rate | 20 v/sec |
Brand | Constant Power |
Operating Temp. | 15 to 50 DegreeC |
Country of Origin | Made in India |
- Automatic digital micro processor based servo controlled voltage stabilizer.
- Contactor at output for tripping at various fault conditions.
- Stabilizer is suitable for unbalanced input voltage and load.
- Controller unit has 4 line LCD display showing input/output voltages and load current along with fault/trip message.
- Wave from distortion - Nil
- Effect of Load Power Factor - Nil
- Indoor/outdoor type (optional)
- Voltage regulation programmable upto 0.5%
- Termination: Heavy duty busbar with high tensile bolt
- Manual Mode: Voltage increase/decrease by spring loaded toggle switch in manual mode
Protection:
- Input over voltage and under voltage cut-off
- Output over voltage and under voltage cut off
- Over current and short circuit cut off
- Single phase prevention
Additional Information:
- Delivery Time: 1 To 2 Week
1000 kVA Oil Cooled Voltage Stabilizer
Product Brochure
Rated Capacity | 1000 KVA |
Phase | Three Phase |
Usage/Application | Industrial |
Cooling Type | Oil cooled |
Brand | Constant Power |
Input Voltage | 360 to 480V |
Output Voltage | 400 to 415V |
Frequency | 45 to 55 Hz |
Efficiency | 98% at full load |
Response Time | 10 m sec |
Country of Origin | Made in India |
Correction Rate | 20 v/sec |
Operating Temp. | 15 to 50 DegreeC |
Oil Cooled Servo Voltage Stabilizers are provided with durable motor controlled stabilization system for ensuring voltage supply. Servo Voltage Stabilizers are designed with transformer boosters for capturing voltage fluctuations and controlling current. With powerful AC synchronous motor, they adjust the level of voltage in clockwise or anticlockwise direction for accurately managing the output voltage. In addition to this, these Three Phase Servo Voltage Stabilizers are designed with high-tech control card, transistors, safe MCB, etc. to ensure maximum efficacy with high level of safety.
1000 kVA Oil Cooled Voltage Stabilizer are used for offering stable and safe output even under the intense working conditions or imbalanced voltage levels. They are ideal to offer complete protection to the costly electrical as well as electronic equipments from any variation of current and voltage from low to high. We are a trusted 3 Phase Stabilizer Manufacturer offering durable stabilizers with adaptable settings of O/P Voltages.
Features:
- "IC" based solid-state, relay less, plug in control cards for easy online serviceability.
- Output voltage adjustable ± 6% of set voltage from front panel.
- Meters on front panel for easy monitoring of input and output voltage along with limit indicators.
- Provision for Auto / Manual control from the front panel.
- Wide ambient temperature operation from -20°C to 50°C.
- Due to new innovations & improvements the technical specifications are subject to change.
100 kVA Servo Voltage Stabilizer
Product Brochure
Rated Capacity | 100 KVA |
Phase | Three Phase |
Usage/Application | Industrial and Commercial |
Cooling Type | Oil cooled |
Input Voltage | 360 to 480V |
Output Voltage | 400 to 415V |
Control Type | Digital controller |
Brand | Constant Power |
Country of Origin | Made in India |
We are the leading manufacturer of 100 kVA Servo Voltage Stabilizer.
Normally these Servo Stabilizer can be used for various types of applications like cold storage plants, manufacturing plants / industries and with various types of machines like Treadmill, Photo Copier, Scanner Machines at Airport, Medical Equipments, CNC machines, Injection Moulding Machines. Printing Machines, packaging machines, chillers , boilers , Scientific Equipments. These servo voltage stabilizer can be used for industries like cements plants, flour mills , rice shellers, hotels / restaurants, food processing units, pharmaceutical units , paper mills, oil refineries, rubber industries, textile mills, warehouses, rolling mills, sponge iron units, showrooms, schools and colleges etc.
Specifications:
- Automatic digital micro processor based servo controlled voltage stabilizer.
- Contactor at output for tripping at various fault conditions.
- Highly intelligent micro processor based 3 phase P.F. Controller with Dual P.F. Setting and Master Slave modes
- Stabilizer is suitable for unbalanced input voltage and load.
- Controller unit has 4 line LCD display showing input/output voltages and load current along with fault/trip message.
- Wave from distortion - Nil
- Effect of Load Power Factor - Nil
- Indoor/outdoor type (optional)
- Voltage regulation programmable upto 0.5%
- Termination: Heavy duty busbar with high tensile bolt
- Manual Mode: Voltage increase/decrease by spring loaded toggle switch in manual mode
Protection:
- Input over voltage and under voltage cut-off
- Output over voltage and under voltage cut off
- Over current and short circuit cut off
- Single phase prevention
Oil Cooled Servo Voltage Stabilizer 250 KVA
Product Brochure
Phase | Three Phase |
Usage/Application | Industrial |
Brand | Constant Power |
Input Voltage | 360 to 480V |
Frequency | 45 to 55 Hz |
Efficiency | 98% at full load |
Cooling Type | Oil Cooled |
Response Time | 10 m sec |
Output Voltage | 400 to 415V |
Country of Origin | Made in India |
Capacity | 250 kVA |
Correction Rate | 20 v/sec |
Operating Temp. | 15 to 50 DegreeC |
Features:
- "IC" based solid-state, relay less, plug in control cards for easy online serviceability.
- Output voltage adjustable ± 6% of set voltage from front panel.
- Meters on front panel for easy monitoring of input and output voltage along with limit indicators.
- Provision for Auto / Manual control from the front panel.
- Wide ambient temperature operation from -20°C to 50°C.
- Due to new innovations & improvements the technical specifications are subject to change.
Three Phase Servo Controlled Voltage Stabilizer
Product Brochure
Phase | Three Phase |
Usage/Application | Industrial |
Intput Window | 380V To 480V |
Cooling Type | Oil cooled |
Control Type | Digital controller |
Country of Origin | Made in India |
Capacity | 700 kVA |
Three Phase Servo Controlled Voltage Stabilizers are provided with durable motor controlled stabilization system for ensuring voltage supply. Servo Voltage Stabilizers are designed with transformer boosters for capturing voltage fluctuations and controlling current. With powerful AC synchronous motor, they adjust the level of voltage in clockwise or anticlockwise direction for accurately managing the output voltage. In addition to this, these Three Phase Servo Voltage Stabilizers are designed with high-tech control card, transistors, safe MCB, etc. to ensure maximum efficacy with high level of safety.
1000 kVA Oil Cooled Voltage Stabilizer are used for offering stable and safe output even under the intense working conditions or imbalanced voltage levels. They are ideal to offer complete protection to the costly electrical as well as electronic equipments from any variation of current and voltage from low to high. We are a trusted 3 Phase Stabilizer Manufacturer offering durable stabilizers with adaptable settings of O/P Voltages.
Features:
- "IC" based solid-state, relay less, plug in control cards for easy online serviceability.
- Output voltage adjustable ± 6% of set voltage from front panel.
- Meters on front panel for easy monitoring of input and output voltage along with limit indicators.
- Provision for Auto / Manual control from the front panel.
- Wide ambient temperature operation from -20°C to 50°C.
- Due to new innovations & improvements the technical specifications are subject to change.
Additional Information:
- Delivery Time: 1 To 2 Week
Oil Cooled Servo Stabilizers
Minimum Order Quantity: 1 Piece
Rated Capacity | 1000 KVA |
Usage/Application | Industrial |
Cooling Type | Oil cooled |
Country of Origin | Made in India |
Additional Information:
- Delivery Time: 1 To Week